1, equipment description:
Alumina black laser marking machineUsing the world's most advanced laser developed from a new generation of laser marking system. The laser is used to output the laser, and the marking function is realized by controlling the deflection of the scanning galvanometer. Widely used in various types of metal and non-metallic materials, fine marking, especially for mobile phones, computers, consumer electronics accessories surface fine marking.
2, performance characteristics
◆With solid fiber lasers, electro-optical conversion efficiency of up to 60%, excellent beam qualityM2<1.4,Suitable for ultra-fine processing.
◆Focus spot diameter 10um. Divergence angle is the semiconductor pump laser 1/4, to create a high precision marking effect.
◆Using the original German scanning galvanometer, marking speed, high precision, quality is more assured.
◆Full air-cooled design, 100,000 hours without supplies, maintenance-free, low cost; energy saving, machine power is only 500W.
◆One modular design, small size, easy to install.
3, applicable materials and industry applications
Especially for the depth, smoothness, fine requirements of high areas, such as IC chips, digital products, precision machinery, jewelry, sanitary ware, measuring tools, watches and clocks, glasses, electrical appliances, electronic components, metal jewelry, Auto parts, plastic products, medical equipment, and other high-precision products, micro-processing logo.
4、Technical Parameters
Model |
FBL-10 |
FBL-20 |
Average output power |
10W |
20W |
Laser wavelength |
1064nm |
|
Source of excitation |
Yb - doped fiber |
|
Beam quality |
M2< 1.4 |
M2< 1.8 |
Modulation frequency |
20kHz-100kHz |
|
Carving depth |
≤0.4 |
≤0.5 |
Carving range |
110x110mmor160x160mmOptional |
|
Maximum wire speed |
≤10000mm/s |
|
Minimum character |
0.10mm |
0.20mm |
Minimum line width |
0.010mm |
0.015mm |
Repeat accuracy |
±0.001mm |
|
Power supply |
220V/50-60Hz |
|
Power consumption |
400W |
500W |
cooling method |
Air-cooled |
5, sample display: